HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

PRE-ORDER
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
SAVE 5% OFF YOUR FIRST ORDER
Use discount code FIRSTLEGENDS at checkout.

EXCLUSIVE DISCOUNTS AVAILABLE
Military, First Responders & Students
Learn More

HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

PRE-ORDER

Regular price $134.47
/
  • Available
Ask us a question

Items in the same order as this item, may be delayed.

NOTE: This item is on backorder, which means it will be delivered as soon as we receive our next shipment from our supplier. This typically ranges from 1 to 3 weeks.

Earn 536 CaveCoin by purchasing this item.

or Sign Up to start earning on your next order.

About this item

Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card.

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. 

Be sure to check out all our pre-built quads, and all our Happymodel products!

Specifications

  • Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
  • Size: 120mmx120mmx50mm
  • Brand Name: Happymodel
  • Wheelbase: 85mm

FLIGHT CONTROLLER

  • Built-in voltage meter sensor, voltage meter scale 110
  • Built-in current meter sensor, current meter scale 470
  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • GYRO Sensor: BMI270  (SPI connection)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Mount hole size: 25.5mm x 25.5mm
  • Built-in Serial ExpressLRS 2.4G
  • Model: Crazy F405 ELRS HD
  • Built-in BMP280 Barometer
  • Built-in 8MBp black box

ONBOARD UART ELRS 2.4GHZ RECEIVER

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • Could update firmware via ExpressLRS configurator
  • Antenna: enameled copper wire 31mm length
  • Default firmware version: ExpressLRS V3.0.1
  • Firmware target: HappyModel EP 2400 RX
  • Telemetry output Power: <12dBm
  • RF Frequency: 2.4GHz

ONBOARD 4-IN-1 ESC

  • Current: 12A continuous peak 15A (3 seconds)
  • Factory firmware: Bluejay ESC V0.19
  • Support BLHeli_S Bluejay firmware
  • Power supply: 1-2S LiPo/LiPo HV
  • Default protocol: DSHOT300
  • Firmware target: Z-H-30

MOTORS

  • Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
  • Mode: EX1103 11000Kv
  • Shaft Diameter:Φ1.5mm
  • No.of Cells(Lipo):1-2S
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Weight(g):3.8g

PROPELLERS

  • Center Hole Dia:1.5mm
  • Center Thickness:5mm
  • Props Dia:52.17mm
  • Weight:0.88g
  • Pitch:2.3inch
  • Material: PC

Includes

  • 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Recently viewed