Name: Hobbywing XRotor F722 3-6S 30x30 Stack/Combo (F7 FC / 32Bit 65A 4in1 ESC) (20x20 Mounting Option)
Brand: Hobbywing
SKU: sku-40244950761585
Price: 200.77 CAD
Availability: InStock

Minimum quantity	Discount
Buy 2 +	Get 10% discount

Buy 2 +, Get 10% discount

Hobbywing XRotor F722 3-6S 30x30 Stack/Combo (F7 FC / 32Bit 65A 4in1 ESC) (20x20 Mounting Option) at WREKD Co.

SAVE 5% OFF YOUR FIRST ORDER
Use discount code FIRSTLEGENDS at checkout.

EXCLUSIVE DISCOUNTS AVAILABLE
Military, First Responders & Students
Learn More

Price

In Stock

Ship from

WREKD®, Ohio, USA

WREKD® Partner, Florida, USA

Quantity

NOTE: This item is on pre-order, which means it will ship very soon. This typically ranges from 3 to 7 days.

Hobbywing XRotor F722 3-6S 30x30 Stack/Combo (F7 FC / 32Bit 65A 4in1 ESC) (20x20 Mounting Option)

$200.77

Ships from: Florida Warehouse

Learn about our Shipping and Return Policy

Earn 200 CaveCoin by purchasing this item.

Log In or Sign Up to start earning on your next order.

About this item

Check out all our 30x30 stacks & combos, and our Hobbywing selection!

Features

Manual for the FC
Manual for the ESC

XRotor 65A 4in1 ESC

High performance 32-bit microprocessor with the running frequency of up to 120MHz for excellent performance.
Third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
Code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
Also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost aircraft.

F7 Flight Controller Features

STM32 F722 MCU allows the FC to run the PID looptime and gyro with higher frequency.
Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
The FC supports Betaflight firmware and allows parameter adjustment via Betaflight software is more applicable to FPV racing.
Onboard Flash chip can record and save flight/black box data allowing users to adjust the setup of their aircraft easily.
Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS and etc.
LED strip signal output port allows users to adjust the color and flash mode of the LED strip via the FC.
Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port, extra current meter is needed).
Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.
Board load 5V and 10V BEC, both can output 2A. It can supply power for receiver, VTX, LED lamp and others devices.

Specifications

XRotor F7 FC

Compatible with (Multirotors) Quadcopters
Firmware HOBBYWING_XROTORF7CONV
FC Programming Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150,
Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A ; 10V @ 1.5A
Size 32x32mm
Weight 3.3g